Versa-Matic's E2 2" pump uses the Elima-Matic® Air Valve System to
provide non-stalling, lube-free performance. It is available in a
clamped or bolted design, with some models offering a side discharge feature
that prevents
corrosive fluid from leaking onto the pump's center section.
The E2 2" Pump. . .
Is available in either plastic or metal
Avoids blow-by when the pump is online but not in use
Is self-priming
Provides dimensional interchangeability with Wilden™ 2" pumps
Offers horizontal discharge model on bolted metallic pump
Select a pump type to display the corresponding specifications and performance charts below.
Note: For E2FV pumps fitted with PTFE diaphragms, reduce water discharge figures by 20%. Suction lift is reduced to 10' (3.05m) dry and 20' (6.10m) wet.
Caution: Do not exceed 125 psig (8.5 bars) air supply or liquid pressure.
Note: For E2P pumps fitted with PTFE diaphragms, reduce water discharge figures by 20%. Suction lift is reduced to 10' (3.05m) dry and 20' (6.10m) wet.
Caution: Do not exceed 100 psig (6.9 bars) air supply or liquid pressure.
Note: For E2P pumps fitted with PTFE diaphragms, reduce water discharge figures by 20%. Suction lift is reduced to 10' (3.05m) dry and 20' (6.10m) wet.
Caution: Do not exceed 100 psig (6.9 bars) air supply or liquid pressure.
